There are many factors that you have to take into consideration while installing a fan. Injury dangers and the remarkable qualities of a ceiling fan go hand in hand. Ceiling fans use less electricity than an air conditioner, and they can cool down a room and add a sophisticated look to it. However, one needs to be very careful with the installation of the fan keeping possible dangers in mind. It is clear from the structure of the fan that one is attaching blades to the ceiling of the room that are powered with high electricity and spins at a high velocity.
We suggest you do not take any chances on its installation without concerning the user manual or an expert. Here are some dangers to be considered before installing a ceiling fan in your room.
Choosing the appropriate mounting system
Ceiling fans should be mounted or installed in the middle of the room and at least 7 feet above the floor and 18 inches from the walls. If your ceiling height allows, then install the ceiling fan 8-9 feet above the floor for optimal airflow.
These mounts come with a 3-5 inch downrod. Downrod is a metal pipe that extends from the ceiling to the top of the fan.
These mounts can be used to hand the ceiling fan at 8-9 feet from the floor for tall ceiling heights. The downrods range between 6 inches (for 9 ft ceiling) to 120 inches (for 20 ft ceiling).
The mounts anchor the fan directly against the ceiling. Most of the ceiling fans can be installed as a flush mount, and many manufacturers sell ceiling fans that are specifically designed for this purpose.
Choosing the appropriate mounting system
Now you must be wondering what the minimum ceiling height for ceiling fan is. Let us tell you, the standard installation height for a ceiling fan is at least 2.1m from the floor to the blades of the ceiling fan. There is another point here! The blades of the fan should be, at least, 300mm from the ceiling of the house. So now you must have understood that ceiling fan height from floor should be, at least, 2.1m.
Considering installation dangers
DIY installation and its adverse effects
Consider the technical aspects of the ceiling fan setup before attaching the fan high up on the roof. To attach the fan to the ceiling, you will need to place a high ladder that holds itself, then hold a thick, awkwardly shaped object in your hand and climb up.
Make sure you make it to the top of the ladder without falling away or dropping the fan, you’re likely to get to exhibit expert balance while you attempt to join the fan with both hands; you will not have any hands left to hold on the ladder. That is why we need a ladder that holds itself.
A professional technician gets the tools and has the training to execute this job while ensuring safety as well as shielding the fan on which you spent a good amount of money.
Fan falling because of the wrong installation
It is quite scary if one day a fan decides to detach itself. An incident like this could lead to injury to members of your family as well as the furniture in your home. It goes without mentioning that the fan would also likely be ruined in the process.
Fans can be heavy, and when you think about the joint forces of gravity acting 24/7 and the force created while the fan is switched on, it should be no surprise that a falling fan is a risk. Qualified technicians know exactly how to install the fan, so you don’t ever have to worry about a ceiling fan falling and understand the dangers connected with it.
Fan electrocuting and fire risks
It may seem like an obvious first step, but many people forget to turn off the power for their home before performing any installation involving power. It is a fatal error that will lead to electrocution.
Besides, you need to take into account if your home’s circuits have the capacity to deal with the added load of the high-powered ceiling fan. The fan’s wiring is made difficult by overseeing the fact that somebody must do it while balancing the fan in one hand and standing on top of a ladder. These fans often have a light fixture, which adds-on to the wiring complexity. We understand that getting the wiring wrong can at best result in a non-functioning appliance, and fires, at worst.
Ceiling fan in accordance with ceiling height
Low Ceiling Height
Lower than 8′ ceiling height that makes you install a flush mount fan does not need a downrod. As flush mount fans are the ones that attach directly to the ceiling and is also known as a hugger fan. They sit very near the ceiling and provide the utmost security distance between fan and floor, but they do not always have the best airflow as there’s often insufficient air space between the ceiling and the fan.
Standard Ceiling Height
If your ceiling is at least 8′ high, you will consider a fan with a brief downrod as opposed to a flush-mounted fan. Make sure it keeps the fan at least 7′ above the ground that can still provide great airflow. The distance between the ceiling and the fan blades ensure good airflow and makes the room cool. Medium is the right ceiling fan downrod length that keeps the fan as high as 7′ above the ground.
High Ceiling Height
If your ceiling is greater than 8′, for optimum airflow and look, you need to try and hang your fan so that it’s between 8 and 9 feet above the ground. You can use a long downrod that will place a perfect distance between a high ceiling, the fan, and the floor. It ensures the right mechanism needed to keep the room cool.
Buy ceiling fans for high ceilings from the following links:
|Product Image||Product Name||Link To Check Price|
44" Dempsey Low Profile Fan with Table Lamp (Noble Bronze)
Prominence Home 80091-01 Abner Vintage Indoor/Outdoor Ceiling Fan, ETL Damp Rated 52" LED Schoolhouse Edison Bulb
The minimum ceiling height for ceiling fan from the floor should be 2.1m, and the maximum ceiling fan height from floor should be somewhere between 8-9 feet. One can always choose the downrod length based on the ceiling height and the above metrics. Make sure that an expert helps you with the right installation of the ceiling fan to be safe from the above-mentioned dangers of a wrong installation.