This modern world is full of various technologies without which our survival seems quite unrealistic. We use many of these in our day to day life or even we can say that we totally depend on them for our majority of work. All appliances made using such technologies are our day to day requirements. Some of its really fantastic discoveries include the devices which help to protect our electrical appliances, especially the voltage stabilizer.
All the electrical appliances are made to work smoothly in some restricted power supply as per its requirement but it does not work properly if the input power supply is either lower or higher than the required range. In such a condition of fluctuated power supply, many of the appliances either get less efficient or get permanently damaged causing you a great loss and the only remedy for this situation is a voltage stabilizer that provides your appliance a constant power supply irrespective of the input power supply.
So, here we have compiled the list of best stabilizers for your 1.5-ton air conditioners which will protect your AC from any possible mishappening and protect the sensitive and expensive compressor from the damage caused by the power fluctuation.
Our Top Pick Stabilizer For 1.5 Ton AC In India
Product Name | Product Image | Product Buy Link |
V-Guard VG 400 for 1.5 Ton AC |  | |
Microtek EM4160+ Automatic Voltage Stabilizer for 1.5 Ton AC |  | |
Monitor 4-KVA Voltage Stabilizer for 1.5 Ton Split/Inverter AC |  |
V-Guard VG 400 for 1.5 Ton AC
A 1.5-ton split AC which we use generally in our homes uses a compressor that is very sensitive to power fluctuation. The compressors get damaged if they receive a high or low voltage other than it’s restricted for it, which has a very expensive servicing afterward and lowers the durability of the device as well. So, a stabilizer is a must for all the AC to protect it from such fluctuation problems and maintain its durability. V-Guard VG 400 for 1.5 ton split AC is one of the most favorable stabilizers for the split ACs. It has a wide range of overcoming the power fluctuation. It allows only the required amount of the voltage supply to the AC and thus maintains the consistency of the power for the compressor’s well functioning. It uses the advanced IC technology design to support the efficiency of the compressor by correcting the excess input voltage. It has a built-in thermal overload protection which saves your AC from getting overheated or causing fire accidents. Some such ideal features of this stabilizer are briefed below.
- Dimensions: This stabilizer of V-Guard has a dimension of 32.8cmx21.6cmx15.5cm and the weight of this stabilizer 2.8kg.
- Display: This AC has an LED indicator to show the input and output voltage performance. It has a user-friendly interface, when the device is on the input LED glow whereas the output LED lets you know the mode of operation.
- Voltage Range: This stabilizer can stabilize or regulate the input voltage for a wide range i.e. 170V-270V.
- Capacity: This AC stabilizer has the capacity to provide the constant voltage to AC of 1.5 ton. It has 12 amps power capacity.
- Technology: The technology used by this stabilizer is the advanced IC technology design circuitry which protects the expensive components such as compressor, PCB, display panel, etc from even a small voltage fluctuation by correcting the input voltage much better than the conventional circuitry design.
- If the power supply is suddenly off and fails to resume soon, this can rupture the functioning of your compressor but this stabilizer uses an intelligent time-delay system which makes it turn on automatically in such power cuts.
- It also has a built-in thermal overload protection which at the time of excessive current consumption or internal short circuit in PCB or wiring which lead overheating of your AC and disconnects the power load and saves your device from burning.
- It has an elegantly designed cabinet with a wall mounting facility which saves your storage and ensures the safety of stabilizer.
- It supports low and high voltage cut off.
Pros
- It is easily mountable to your walls which lowers the risk, so that the stabilizer will be protected from any possible damage-causing substances.
- The built-in thermal overload protection protects your device from causing fire due to short circuit or overheating.
- The built-in thermal overload protection protects your device from causing fire due to short circuit or overheating.
Cons
- It may be quite expensive for some with the AC.
- It can’t be installed by you, an experienced personnel is required for that purpose.
- It requires proper and regular maintenance.
Thus, this stabilizer of V-Guard with the capacity of holding a high power range comes with a 3 years product warranty. Its intelligent time-delay system and advanced IC technology design both work to keep your costly compressor safe from any voltage fluctuation so that you will be free of any kind of tension about your AC and its durability. It also allows you to monitor all this from the LED indicator, which keeps you informing about the input and output voltage regularly. So, this guard protects your AC from any kind of small or big power fluctuation.
Microtek EM4160+ Automatic Voltage Stabilizer for 1.5 Ton AC
The stabilizers of Microtek for all types of AC are always the perfect and most compatible fit for them. Microtek EM4160+ automatic voltage stabilizer is for the AC of 1.5 ton. It works on all the latest and advanced technologies. It is the most suitable remedy for the power fluctuation which leads to the dysfunction of your devices. Power fluctuation or inconsistent supply of the power to your air conditioners may lead to the damage of your AC and especially its compressor which is most expensive and costs high for repairment as well but the use of this stabilizer saves you from this high risk.
Microtek stabilizer which works on the “save power technology” not only protects your AC from fluctuated voltages but also helps you to save the high consumption of power, thus it helps in power conservation and saves your bill as well. It also works as the shield of your AC’s compressor. It provides instant power backup at the time of power cut. It is one of the reliable stabilizers which makes you tension free from bothering about your AC. Some of the most extraordinary features of this stabilizer are described below.
- Dimension: The dimension of this elegant stabilizer is 36cmx19.5cmx26cm whereas its weight is of about 10.12kg.
- Display: This stabilizer uses a digital display which is a seven-segment digital display that lets you digitally monitor input and output voltage. It also lets you know the low and high voltage and overload cut-off.
- Voltage Range: This voltage stabilizer has truly a wide range of stabilizing voltage i.e. 160V-285V, which means it can assist to operate the AC in a minimum 160V and a maximum of 285V whereas the required voltage of maximum ACs are 230V.
- Capacity: This voltage stabilizer has the maximum capacity of stabilizing the AC of 1.5 ton.
- Technology: This stabilizer basically works on the save power technology along with several other connected features. This technology assists to save the consumption of extra power by the AC at the time of low power supply. So, along with a consistent power supply, we also get a lower and consistent bill.
- This voltage stabilizer efficiently cuts off high or low voltages from reaching the connected equipment to ensure the safe and secure functioning of the AC.
- It makes the use of a silver caked relay feature to enable it to perform effectively in a wide input range. It works in providing the optimum voltage.
- It has intelligent auto-start features. It lets you automatically step up and step down the output voltage as per the input voltage which will provide a consistent power supply to the compressor.
Pros
- It is the most energy-efficient stabilizer since it uses the save power technology and saves the high power consumption.
- It protects the voltage-sensitive and expensive compressor from sudden voltage cut off through the intelligent auto-start feature.
- It can work in a wide input range to provide optimum voltage and this functions because of its silver caked relay technology.
Cons
- This entire setup of an AC along with a stabilizer might be a bit costly for some.
- The installation of the stabilizer will require trained technicians.
- It will be used for an AC of 1.5 ton not more than that.
Therefore, the Microtek EM4160+ Automatic Voltage Stabilizer for 1,5 ton AC, is a perfect companion for your 1.5 ton AC which provides its high voltage range of 160V-285V. The modern features of this stabilizer such as low and high cut, silver caked relay, intelligent auto start, digital seven-segment display, energy efficiency, and many more features makes it more versatile and compatible to use, also since it is easily mountable to your wall so you don’t have to worry much about keeping it away from dust or water. Thus, it is one of the trusted products for your AC.
Monitor 4-KVA Voltage Stabilizer for 1.5 Ton Split/Inverter AC
The major problem for any AC is probably the inconsistent power supply which leads to damage to its several components and especially the heart of the AC i.e. the compressor which is a lot sensitive to power fluctuation. To protect your AC from such inconsistency, a voltage stabilizer is must with lup toof unique essential features for which monitor 4KVA voltage stabilizer can be your ideal choice so let’s check its various functions which can be of your use. Monitor 4- KVA stabilizer for 1.5-ton split/inverter AC supports both Split and Inverter AC. This voltage stabilizer has options for installations since it is easily mountable to the walls as well as the floors. It also has a wide range of power protection. This stabilizer will only be used for your AC of upto 1.5-ton capacity. This stabilizer ensures the durability of your AC by its strong power protection system and also ensures its own durability since it has been winded with the best quality copper. Along with these features, the stabilizer also has some splendid and useful functions and technology discussed below:
- Dimensions: This stabilizer of Monitor 4-KVA has a dimension of 26.6cmx17.8cmx10.6cm and the weight of this stabilizer 3.3kg.
- Display: This AC has an LED bulb indicator to show the input and output voltage. It has a user-friendly interface, when the device is on the input LED bulb glows whereas the output LED bulbs lets you know the mode of operation.
- Voltage Range: This stabilizer can stabilize or regulate the input voltage for a wide range i.e. 170V-270V. The power rating of this stabilizer is 400va.
- Capacity: This AC stabilizer has the capacity to provide constant voltage to AC of 1.5 ton.
- Technology: This stabilizer is designed with high-end features for the power protection which is its basic functioning, it has better power saving, better conductor, and better power factor. It is properly functioning for both split normal and inverter AC.
- If the power supply is suddenly off and fails to resume soon, this can rupture the functioning of your compressor but this stabilizer uses an automatic reset system which makes it turn on automatically in such power cuts.
- It provides the best quality copper winding and has an epoxy metal body with an insulated body that ensures its long term durability and working.
- It has an elegantly designed cabinet with a wall as well as a floor mounting facility which saves your storage and ensures the safety of the stabilizer and which is more convenient to use.
- It can well function in the 0-50°C temperature and also in 30-90% humidity.
- It supports low and high voltage cut off i.e. exceeding 170V-270V the power automatically is cut by the stabilizer.
Pros
- It is easily mountable to your walls as well as the floors which makes it more compatible to use. It comes with a sleek cabinet that can be easily mounted on the wall without bothering about space.
- The stabilizer is made up of 100% copper winding transformer which is a good conductor to electricity results in less power loss, low heat generation, and better power factor, making it a power-saving transformer.
- It has high and low voltage cut-off that means exceeding voltage from its range, it will automatically cut the power load to save the compressor from any damage.
- It is suitable for both inverters as well as normal AC.
Cons
- Only suitable for a single AC and not for other appliances.
- The floor installation may require a long cable since it has a shorter one.
- It requires proper and regular maintenance.
Thus, Monitor 4-KVA voltage stabilizer for 1.5 ton AC, comes with high-end features and also with 5 years replacement warranty and 1 years service warranty. It is a perfect stabilizer for an AC which has a long durability with better power factors and power conservation. This stabilizer is also designed to function properly in the temperature range of 0-50°C and humidity of 30-90% which reveals its long term working even in harsh situations.
The function of every stabilizer is to supply a constant voltage to your AC so that the high power fluctuation would not destroy its compressor, the PCB modules, and other important units. Although all the stabilizers have the same function but still they vary because of their technology used, materials used, new features, power-saving capacity, and many more other unique functions. So, it is really important to go through the features of every best possible product that is why hereby we have provided you some of the best ones along with their pros and cons to let you decide the one which is most suitable for your AC. So, here was the compiled list of the best AC for you. Thus, these were some of the most effective and efficient voltage stabilizers for your air conditioners, especially one with 1.5-ton capacity. All of them have some unique and special features within them and almost all have a good range of voltage stabilization. Go through the features of each and try to make a healthy comparison to decide the one which suits your AC the best.